Contact 812-425-1336

Timken® UCP206-19 TIMUCP206-19
  1. pin-int

Timken® UCP206-19 TIMUCP206-19

Timken® UCP206-19 UCP200 Industrial Duty Single Row Standard Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 21/32 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 6-1/2 in OAL x 3-5/16 in OAH

  • Manufacturer: Timken
  • Brand Name: Timken®
  • Part Number: TIMUCP206-19
  • MPN: UCP206-19
  • UPC: 087796071988
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading
  • Sign In for Pricing and Availability

Timken® U Series UC200 mounted ball bearings (housed units) feature Timken® U Series set screw locking (UC) style wide inner ring ball bearings, contact nitrile seal and an external flinger to provide multiple levels of protection against contamination. Timken® ball bearings are ideal for handling high speeds and light radial loads.

Timken®, UCP206-19, Pillow Block Ball Bearing Unit, Industrial Duty Single Row Standard, Series: UCP200, 1-3/16 in Bore, 21/32 in Bolt Center-to-Center Length, 1-11/16 in Base to Bore Centerline, 6-1/2 in Overall Length, 1.8115 in Overall Width, 3-5/16 in Overall Height, Two-Bolt Base Mounting, Cylindrical Bore, 1-7/8 in Base Width, Set Screw Locking Device, Triple Lip Seal, Non-Expansion, 19.5 lb Dynamic/11.3 lb Static Load, -4 to 212 deg F, 4300 rpm Maximum, Cast Iron, Powder Coated

Base Width      :      1-7/8 in
Base to Bore Centerline      :      1-11/16 in
Bolt Center-to-Center Length      :      21/32 in
Bore Diameter      :      1-3/16 in
Bore Type      :      Cylindrical
Expansion Type      :      Non-Expansion
Finish      :      Powder Coated
Load Capacity      :      19.5 lb Dynamic/11.3 lb Static
Locking Device      :      Set Screw
Material      :      Cast Iron
Maximum Speed      :      4300 rpm
Mounting Type      :      Two-Bolt Base
Overall Height      :      3-5/16 in
Overall Length      :      6-1/2 in
Overall Width      :      1.8115 in
Seal Type      :      Triple Lip
Series      :      UCP200
Temperature Rating      :      -4 to 212 deg F
Type      :      Industrial Duty Single Row Standard
  • UCP pillow blocks are suggested for industrial applications where normal loads are encountered
  • Compact, 1-piece housing with 2-bolt mounting can be installed in any position and makes bearing replacement easy
  • These units use wide inner ring ball bearings with self aligning spherical outside diameters that compensate for shaft misalignment
  • Timken® UCP series housed units feature the Timken® set screw locking (UC) bearing insert
  • Bearing prelubricated and ready for immediate installation
  • Grease fitting supplied for relubrication
  • The bonded seal design is well suited for applications involving wet or dirty environments
  • Bolt hole spacing dimensions and shaft center location are interchangeable with competitive units
  • Housing designed for ease of bearing replacement
  • Provides the first level of protection against contamination
  • Bonded nitrile rubber seal with an engineered interface to the inner ring
  • Helps protect against abrasive wear, extending seal life
  • Engineered fit between bearing and housing to improve bearing life
  • Precision machined lubrication groove and holes in the outer ring of the bearing
  • Steel cage provides effective ball guidance and high temperature service capability
  • Improved shaft support over narrow rings, improving bearing life and reducing misalignment
  • 120 deg angle minimizes inner ring distortion for smoother running bearing
  • Prelubricated with high-quality lithium-based grease, compatible with most industrial greases
  • Spherical outer diameter
  • CN internal clearance
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_UCP206_18_Catalog.pdf
  • pdfInstruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_UCP206_18_Installation_Manual.pdf