Contact 812-425-1336

Timken® QAPL10A115ST TIMQAPL10A115ST
  1. pin-int

Timken® QAPL10A115ST TIMQAPL10A115ST

Timken® QAPL10A115ST CL Series S2000 Style Solid Block Spherical Roller Bearing Housed Unit, 1-15/16 in Dia Bore, 5.93 to 6.36 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.81 in OAH

  • Manufacturer: Timken
  • Brand Name: Timken®
  • Part Number: TIMQAPL10A115ST
  • MPN: QAPL10A115ST
  • UPC: 883450047081
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading
  • Sign In for Pricing and Availability

Engineered for the harshest conditions, these units feature multiple steel-housing and locking options with complete multi-point sealing solutions (full range of end covers) to optimize your uptime. This drop-in solution is interchangeable with a large range of products and keeps contaminates out for efficient operations.

Timken®, QAPL10A115ST, Spherical Roller Bearing Housed Unit, S2000 Style Solid Block, Series: CL Series, 1-15/16 in Bore, 5.93 to 6.36 in Bolt Center-to-Center Length, 2-1/4 in Base to Bore Centerline, 8.38 in Overall Length, 3.11 in Overall Width, 4.81 in Overall Height, Two-Bolt Base Mounting, Cylindrical Bore, 2.44 in Base Width, Single Concentric Collar Locking Device, Non-Expansion (Fixed), 26300 lb Dynamic/26600 lb Static Load, 3550 rpm Grease/4200 rpm Oil Maximum, Cast Steel

Base Width      :      2.44 in
Base to Bore Centerline      :      2-1/4 in
Bolt Center-to-Center Length      :      5.93 to 6.36 in
Bore Diameter      :      1-15/16 in
Bore Type      :      Cylindrical
Expansion Type      :      Non-Expansion (Fixed)
Load Capacity      :      26300 lb Dynamic/26600 lb Static
Locking Device      :      Single Concentric Collar
Material      :      Cast Steel
Maximum Speed      :      3550 rpm Grease/4200 rpm Oil
Mounting Type      :      Two-Bolt Base
Overall Height      :      4.81 in
Overall Length      :      8.38 in
Overall Width      :      3.11 in
Seal Type      :      T Seal
Series      :      CL Series
Type      :      S2000 Style Solid Block
  • T Seal - Labyrinth seal consists of a Teflon® ring pressed onto the inner ring of the bearing that floats between two pieces of formed steel to accommodate misalignment. When using this seal, the housing comes with a vent fitting. Developed for higher-speed applications involving dirty conditions or moisture-affected areas, is able to operate at higher temperatures and is impervious to most chemicals.
  • Single Collar set-screw locking - CL Series - two set screws positioned at 60 degrees provide maximum positive locking power with minimal run out.
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_Belts_CS08_Catalog.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_Belts_QAPL10A115ST_Specification_Sheet.pdf