Timken® GN111KLLB TIMGN111KLLB

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken® suggests using shaftguarding Technology™, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft.

Timken®, GN111KLLB, Ball Insert Bearing Housed Unit, Special Duty, Series: GN-KLLB, 1-11/16 in Bore, 3.937 in OD, 1-11/16 in Width, Double Seal Closure, 11900 lb Dynamic/5210 lb Static Load, Steel Bearing, 4830 rpm Maximum, Uncoated

• The GN-KLLB series ball bearings are heavy and are similar in design to the standard LL (mechanical-seal) eccentric wide-inner-ring ball bearings
• The GN-KLLB series have heavier section 300 series bearings
• Unlike standard series, the seal in this heavy series is a three-piece construction and includes two fixed inner members and an external rotation slinger

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1012KRRB_Catalog.pdf