The outer ring of this type of bearing has a spherical raceway that allows angular movement of the rings. This means that the bearing can accept high degrees of misalignment. Its internal design enables it to withstand very high radial loads and axial loads. Variants with a tapered bore allow fitting using an adapter sleeve. This type of bearing is particularly suited to heavy mechanical applications where it is difficult to align the seats and radial loads are high. It is well suited to severe operating conditions, involving impact or vibration.
SNR® Spherical Roller Bearing, Series: 213, 80 mm Bore Dia, 170 mm Outside Dia, 2 Rows, 39 mm W, Open Closure, 305 kN, Through Hardened Steel Bearing, Steel Cage, 4900 rpm Maximum, -40 to 120 deg C
| Bearing Material | : | Through Hardened Steel |
| Bore Diameter | : | 80 mm |
| Cage Material | : | Steel |
| Closure Type | : | Open |
| Load Capacity | : | 305 kN |
| Maximum Speed | : | 4900 rpm |
| Number of Rows | : | 2 |
| Outside Diameter | : | 170 mm |
| Series | : | 213 |
| Temperature Rating | : | -40 to 120 deg C |
| Width | : | 39 mm |
- The high radial accelerations of vibrating applications place a particular stress on the cage
- Specific dimensional tolerances guaranteed stability
- Reduced internal radial clearance easy set-up
- Surface optimization
- Reduced power consumption
- Improved performance and reduced friction torque
- Increased operating speeds
- Reduced operating costs
- Optimized internal design, symmetrical rollers
- CN radial clearance
- Pressed cage
- Round bore
Catalog
VIDEO LINK