Sealmaster® 702389 MOR2-22DC

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.

Sealmaster® Ball Bearing Insert, Non-Expansion Standard-Duty Straight Bore, 2-1/8 in Bore, 3.937 in OD, 2-5/8 in Width, Double Seal Closure, 9752 lb Dynamic/6601 lb Static Load, Steel Bearing, Nitrile Rubber Seal, Brass Cage, 3250 rpm Maximum, -20 to 220 deg F, Black Oxide Coated

• Item Features 01=Wide outer ring
• Item Features 02=Lock pin and dimple system
• Item Features 03=Single lip contact seal consists of a nitrile rubber washer in metal shroud to shield the lip from large contaminants
• Item Features 04=Double setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
• Item Features 05=Zone hardened inner race
• Item Features 06=Land riding retainer
• Item Features 07=Lithium complex NLGI #2 grease with an EP additive

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Sealmaster_RB10_Manual.pdf