Cylindrical Roller Bearing have rollers which are essentially cylindrical in shape. This provides a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground ribs on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring (except the NH type). This is especially important when accommodating thermal expansion when both rings must be press fitted. In this series, the NJ, NF and NH types can carry light or intermittent thrust loads. The NN3000 and NN3000K series are available in high precision tolerances and are well suited for use in machine tool spindles.
NTN Cylindrical Roller Bearing, Series: NU2, 45 mm Bore Dia, 85 mm Outside Dia, 1 Row, 19 mm W, Open Closure, 66500 N, Hardened Alloy Steel Bearing, Machined Brass Cage, 7600 rpm Grease/9000 rpm Oil Maximum, -40 to 120 deg C
| Bearing Material | : | Hardened Alloy Steel |
| Bore Diameter | : | 45 mm |
| Cage Material | : | Machined Brass |
| Closure Type | : | Open |
| Load Capacity | : | 66500 N |
| Maximum Speed | : | 7600 rpm Grease/9000 rpm Oil |
| Number of Rows | : | 1 |
| Outside Diameter | : | 85 mm |
| Series | : | NU2 |
| Temperature Rating | : | -40 to 120 deg C |
| Width | : | 19 mm |
- Item Features 01=Unable to accommodate even the lightest axial loads
- Item Features 02=This type is extremely suitable for and widely used as the floating side bearing
- Item Features 03=High capacity cylindrical roller bearings
- Item Features 04=High strength machined brass rivetless cage with square holes
- Item Features 05=ISO class 0 tolerance rating
- Item Features 06=C3 radial clearance greater than normal
- Item Features 07=Round bore
- Item Features 08=63000 N dynamic/66500 N static
- Item Features 09=Without oil hole
Catalog