Cylindrical Roller Bearing have rollers which are essentially cylindrical in shape. This provides a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground ribs on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring (except the NH type). This is especially important when accommodating thermal expansion when both rings must be press fitted. In this series, the NJ, NF and NH types can carry light or intermittent thrust loads. The NN3000 and NN3000K series are available in high precision tolerances and are well suited for use in machine tool spindles.
NTN Cylindrical Roller Bearing, Series: NU10, 100 mm Bore Dia, 150 mm Outside Dia, 1 Row, 24 mm W, Open Closure, 126000 N, Hardened Alloy Steel Bearing, Machined Brass Cage, 4600 rpm Grease/5400 rpm Oil Maximum, -40 to 120 deg C
| Bearing Material | : | Hardened Alloy Steel |
| Bore Diameter | : | 100 mm |
| Cage Material | : | Machined Brass |
| Closure Type | : | Open |
| Load Capacity | : | 126000 N |
| Maximum Speed | : | 4600 rpm Grease/5400 rpm Oil |
| Number of Rows | : | 1 |
| Outside Diameter | : | 150 mm |
| Series | : | NU10 |
| Temperature Rating | : | -40 to 120 deg C |
| Width | : | 24 mm |
- Unable to accommodate even the lightest axial loads
- This type is extremely suitable for and widely used as the floating side bearing
- High strength machined brass rivetless cage with square holes
- ISO class 0 tolerance rating
- C3 radial clearance greater than normal
- Round bore
- 93000 N dynamic/126000 N static
- Without oil hole
Catalog