Contact 812-425-1336

NTN 608LLUC3/EM NTN608LLUC3/EM
  1. pin-int

NTN 608LLUC3/EM NTN608LLUC3/EM

NTN 608LLUC3/EM Micro Round Bore Extra Small Deep Groove Radial Ball Bearing, 8 mm Dia Bore, 22 mm OD, 1 Rows, 7 mm W, 3350 N Load

  • Manufacturer: NTN
  • Brand Name: NTN
  • Part Number: NTN608LLUC3/EM
  • MPN: 608LLUC3/EM
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Pricing and Availability

Single Row Radial Ball Bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. The cage in this bearing is pressed steel. For high speed bearings, machined brass cages are available. Bearings with locating snap rings are also available.

NTN Deep Groove Radial Ball Bearing, Round Bore Extra Small, Series: Micro, 8 mm Bore, 22 mm OD, 1 Rows, 7 mm Width, Double Seal Closure, 3350 N Load, High Carbon Chrome Steel Bearing, Nitrile Rubber Seal, Pressed Steel Cage, 23000 rpm Grease Maximum, -40 to 120 deg C

Bearing Material      :      High Carbon Chrome Steel
Bore Diameter      :      8 mm
Cage Material      :      Pressed Steel
Closure Type      :      Double Seal
Load Capacity      :      3350 N
Maximum Speed      :      23000 rpm Grease
Number of Rows      :      1
Outside Diameter      :      22 mm
Seal Material      :      Nitrile Rubber
Series      :      Micro
Temperature Rating      :      -40 to 120 deg C
Type      :      Round Bore Extra Small
Width      :      7 mm
  • The seal edge forms a double-lip
  • The inner lip touches the V-slot side of the inner rings seal surface
  • There is a slight gap between the inner ring and the outer lip which produces the labyrinth effect
  • Even if friction causes the inner lip to wear, the outer lip constricts around the inner ring to compensate, and thus constantly preserving the perfect sealing effect
  • Due to the fact that it is a contact type seal bearing, the torque will be a little greater but the seal will provide the optimum protection from dust penetration
  • Contact type rubber seal
  • C3 radial clearance greater than normal
  • ISO class 0 precision rating
  • 3350 N dynamic/1400 N static
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/NTN_3201_Catalog.pdf