Single Row Radial Ball Bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. The cage in this bearing is pressed steel. For high speed bearings, machined brass cages are available. Bearings with locating snap rings are also available.
NTN Radial Ball Bearing, Round Bore Extra Small, Series: Micro, 8 mm Bore Dia, 22 mm Outside Dia, 1 Row, 7 mm W, Open Closure, 3350 N, High Carbon Chrome Steel Bearing, Pressed Steel Cage, 32000 rpm Grease/37000 rpm Oil Maximum, -40 to 120 deg C
| Bearing Material | : | High Carbon Chrome Steel |
| Bore Diameter | : | 8 mm |
| Cage Material | : | Pressed Steel |
| Closure Type | : | Open |
| Load Capacity | : | 3350 N |
| Maximum Speed | : | 32000 rpm Grease/37000 rpm Oil |
| Number of Rows | : | 1 |
| Outside Diameter | : | 22 mm |
| Series | : | Micro |
| Temperature Rating | : | -40 to 120 deg C |
| Type | : | Round Bore Extra Small |
| Width | : | 7 mm |
- C3 radial clearance greater than normal
- ISO class 0 precision rating
- 3350 N dynamic/1400 N static
Catalog