Never-Seez NSBT-16 NEVNSBT16

Bostik Never-Seez NSBT-16 Regular Grade is a copper- and graphite-fortified anti-seize and lubricating compound designed to protect metal parts against galling, seizure, rust and corrosion. Supplied in a 1 lb brush-top can for convenient application, it provides reliable protection in demanding environments from -297°F to 1800°F.

The Bostik Never-Seez NSBT-16 Regular Grade Anti-Seize & Lubricating Compound is a premium industrial anti-seize lubricant formulated to protect metal components against seizure, galling, rust, corrosion and pitting in severe operating environments. Supplied in a convenient 1 lb brush-top can, it allows controlled application directly to threaded fasteners, fittings and other metal surfaces.

Never-Seez Regular Grade uses copper flake, graphite, aluminum powder and zinc oxide dispersed in a high-quality grease carrier. The formulation provides protection in high-temperature, high-pressure and corrosive environments while helping components remain easier to disassemble during future maintenance.

With an operating temperature range of -297°F to 1800°F (-183°C to 982°C), Never-Seez Regular Grade is suitable for nuts, bolts, screws, pipe fittings, shafts, valve assemblies, pump mountings, chain drives, machinery, gaskets, press-fit assemblies, taps, drills, packing glands and other industrial metal components. It also helps resist road salt, steam, salt water, alkaline solutions and many chemical or acid vapors.

The product has a 0.13 torque coefficient (K-factor) and can significantly reduce the torque required to achieve a given clamping force compared with dry fasteners. Because anti-seize changes the torque-to-tension relationship, proper torque specifications should always be followed.

Not recommended for high-speed bearings or pure oxygen/oxygen-rich systems.

• Regular Grade anti-seize and extreme-pressure lubricant
• 1 lb brush-top can
• Copper and graphite fortified formulation
• Contains copper flake, graphite, aluminum powder and zinc oxide
• Temperature range: -297°F to 1800°F
• Helps prevent seizure and galling
• Protects against rust, corrosion and pitting
• Helps reduce wear in high-pressure applications
• Provides easier disassembly after prolonged service
• Suitable for steel, stainless steel, titanium, magnesium and other hard metals
• Resistant to road salt, steam and salt-water environments
• Lithium-soap thickened
• Silver-gray appearance
• NLGI Grade 1/2
• Torque coefficient / K-factor: 0.13
• Coefficient of friction: approximately 0.06
• Dropping point: greater than 360°F
• Flash point: greater than 485°F
• Maximum particle size: 2 mil / 50 µm
• Meets MIL-A-907
• Meets GE D6Y28A1-S6
• 5-year manufacturer-guaranteed shelf life when properly stored
• Brush applicator built into container cap
• Sold individually as 1 EA