NACHI 6322C3 NAC6322

Single-row deep groove ball bearings are the most common bearing type in the world due to their versatility and performance. These bearings are available in a variety of seal, shield and snap-ring arrangements. Bearings with seals or shields are standardized and already contain the proper amount of grease. Open bearings will require lubrication. These bearings can sustain radial and/or axial loads and because of their simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.

NACHI Deep Groove Ball Bearing, Series: 6300, 110 mm Bore, 240 mm OD, 1 Row, 50 mm Width, Open Closure, 205000 N Dynamic/179000 N Static Load, Steel Bearing, Stamped Steel Cage, 2900 rpm Grease/3400 rpm Oil Maximum, 250 deg F

• Excellent high speed capability
• Good radial load capacity
• Good axial load capacity in both directions
• Low torque requirements during startup and operation
• Low noise
• Little/no maintenance required
• Longer life - adopted NACHI original seal design to prevent contamination and grease leakage, contains special grease for wider temperature ranges and longer life
• Smooth and quiet operation - the precision level of our bearing components has been enhanced to ensure smooth and quiet operation

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/NACHI_16004C3_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/NACHI_16004C3_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/NACHI_16004C3_User_Manual.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/NACHI_16004C3_User_Manual.pdf