NACHI 29432EMY NAC29432E

NACHI Spherical Roller Thrust Bearings utilize barrel shaped rollers to manage extreme thrust loads while rotating with low friction and allowing for up to 2° of angular misalignment. There are two basic designs; A conventional “E-Type” design uses a machined brass cages while the “EX-Type” design uses an optimized internal design, larger rollers and a stamped steel cage for higher loads and longer life.

NACHI Spherical Roller Thrust Bearing, Series: 29400, 160 mm Bore, 320 mm OD, 95 mm Width, 1510000 N Dynamic/5350000 N Static Load, Steel Bearing, 1000 rpm Oil Maximum, 150 deg C

• The raceway of housing washer of this bearing type is spherical with the center of the radius located on the bearing axis
• The design provides self-alignment capability to the bearing
• The contact angle is approximately 45 deg enabling the bearing to support axial load and a small to moderate amount of radial load

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/NACHI_29318EX_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/NACHI_29318EX_Catalog.pdf