McGill® 2265100000 MCGPCFE2 3/4

TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.

McGill® TRAKROL® Cam Follower, Cylindrical OD, Series: PCFE, 2-3/4 in Roller Diameter, 1-11/16 in Roller Width, 1 in Stud Diameter, 2-1/4 in Stud Length, 1-14 UNC Thread, 1-1/2 in Thread Length, 5120 lb Dynamic/3120 lb Static Load, 1050 rpm Maximum, -20 to 250 deg F, Eccentric Stud, Sealed Closure, Hex Head, Chrome Steel Roller, 8620H Steel Stud, Black Oxide

• Precision ball or tapered roller bearing inserts allow for combination radial and thrust loads
• A heavy sectioned outer race design to help withstand shock loading of cam follower operation
• A ductile stem on stud type versions that provides toughness
• Ball and tapered roller bearings have rubber lip contact seal
• The inch design threads are manufactured to a class 2 tolerance
• Bearings are supplied pre-lubricated and maintenance free

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/McGill_2146710000_Catalog.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/McGill_2244400000_Specification_Sheet.pdf
• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/McGill_4145510000_Manual.pdf