Link-Belt® 10442913 LNKPB22455H

Self aligning double row spherical roller bearings are designed to distribute the load over the symmetrical rollers, assuring positive tracking and smooth operation. The large roller complement provides high capacity for radial or combined radial-thrust loads. Osculation clearance at the ends of the rollers compensates for shock loads and prevents destructive edge loading. These precision bearings with double contoured retainer pockets are designed to meet a broad range of application requirements.

Link-Belt® Pillow Block Spherical Roller Bearing, Series: B22400, 3-7/16 in Bore, 10 in Bolt Center-to-Center Length, 3-3/4 in Base to Bore Centerline, 13 in Overall Length, 4-3/8 in Overall Width, 7-1/2 in Overall Height, Two-Bolt Base Mounting, Round Bore, 3-7/16 in Base Width, Single Set Screw Collar Locking Device, Clearance/Floating Labyrinth Seal, Non-Expansion (Fixed) Expansion, 62300 lb Dynamic/90700 lb Static Load, 225 deg F, 1650 rpm Maximum, Cast Iron, Powder Coated

• Spring locking collar locks inner ring securely to shaft
• Long inner ring for high stability and load support
• Self aligning double row
• Double contoured retainer pockets
• Slotted bolt holes in pillow block
• Extended inner ring, separable outer rings
• Misalignment capabilities total of 4 deg
• Factory set clearance and lubrication
• Field interchangeable seals

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Link_Belt_B440SC_Manual.pdf