Link-Belt® 10441310 LNKMPCL232N

200 series medium duty ball bearings provide design and performance features developed by decades of experience in supplying precision ball bearing inserts for other major mounted bearing manufacturers and complete mounted units to machinery and equipment manufacturers. They are priced competitively to bearings of comparable construction and design. In addition to sound basic design and construction, special features minimize the three most common causes of premature bearing failure loosening of bearings on rotating shafts, entrance of contaminants or loss of lubricant due to seal failure and insufficient housing strength.

Link-Belt® Pillow Block Ball Bearing, Medium Duty, Series: 200, 2 in Bore, 6-29/32 in Bolt Center-to-Center Length, 2-1/2 in Base to Bore Centerline, 8-7/8 in Overall Length, 1-57/64 in Overall Width, 5 in Overall Height, Two-Bolt Base Mounting, 2-5/16 in Base Width, Centrik-Lok Locking Device, Single Lip Seal, 9800 lb Dynamic/6570 lb Static Load, 225 deg F, 4360 rpm Maximum, Cast Iron, Powder Coated

• The Centrik-Lok method of fastening the bearing inner race to the shaft provides substantial improvement in holding power compared to spring locking collars
• The unique 2-piece collar and 8-tab design offers the best shaft holding force in the industry
• Optimum protection from loss of lubricant and entrance of dirt and contaminants is achieved with positive lip-type contact seals
• Housings are designed to withstand bearing load ratings, external vibration and shock
• Spherically seated bearing insert with anti-rotation device
• Standard backing
• Narrow inner ring

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Link_Belt_B440SC_Catalog.pdf