Contact 812-425-1336

Link-Belt® 10423685 LNK21236
  1. pin-int

Link-Belt® 10423685 LNK21236

Link-Belt® 10423685 21200 2-Piece Rigid Normal Duty Pillow Block Sleeve Bearing Unit, 2-1/4 in Dia Bore, 6-1/2 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 8-1/2 in OAL x 3-3/4 in OAH

  • Manufacturer: Regal Rexnord
  • Brand Name: Link-Belt®
  • Part Number: LNK21236
  • Alt Part Number: 21236
  • MPN: 10423685
  • UPC: 662327192600
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading
  • Sign In for Pricing and Availability

Rigid sleeve bearing units provide compact and reliable usage in applications where continuous operation and uninterrupted service are required. Because the bearing material wears gradually, sudden breakdowns and costly maintenance are minimized. Sleeve bearings can also operate extremely quietly. The standard bearing materials of babbitt, bronze and cast iron will handle a wide variety of applications such as on log decks, sewage treatment equipment, furnaces and ovens, quiet operating fans and blowers, power plant dampers and stokers, oscillating shaft applications and other general conveying and power transmission machinery.

Link-Belt® Pillow Block Sleeve Bearing Unit, 2-Piece Rigid Normal Duty, Series: 21200, 2-1/4 in Bore, 6-1/2 in Bolt Center-to-Center Length, 1-7/8 in Base to Bore Centerline, 8-1/2 in Overall Length, 4-1/2 in Overall Width, 3-3/4 in Overall Height, Two-Bolt Base Mounting, 2-3/4 in Base Width, Unsealed Seal, Non-Expansion (Fixed), 410 lb Load, 130 deg F, 400 rpm Maximum, Cast Iron, Powder Coated

Base Width      :      2-3/4 in
Base to Bore Centerline      :      1-7/8 in
Bolt Center-to-Center Length      :      6-1/2 in
Bore Diameter      :      2-1/4 in
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Powder Coated
Load Capacity      :      410 lb
Material      :      Cast Iron
Maximum Speed      :      400 rpm
Mounting Type      :      Two-Bolt Base
Overall Height      :      3-3/4 in
Overall Length      :      8-1/2 in
Overall Width      :      4-1/2 in
Seal Type      :      Unsealed
Series      :      21200
Temperature Rating      :      130 deg F
Type      :      2-Piece Rigid Normal Duty
  • Bearing of babbitt or bronze is securely anchored in housing
  • Housing is drilled and tapped for grease cup or lubrication fitting, grooves distribute lubricant over loaded area
  • Finished ends permit flush mounting of pulley, sprocket and collar against bearing when required
  • 2-piece pillow block has shims to provide for adjustment and compensate for wear
  • Mounting surface is finished to provide firm seating on flat support
  • Relubricatable bearing
  • Babbitt sleeve
  • Angled split joint design
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Link-Belt_11KB204N_Catalog.pdf