LEESON® DC SCR Control, Non-Reversing, 115/230 VAC, 12 A, 1/8 to 2 hp, 1 Phase, 5.63 in Width, 4.56 in Depth, 7-1/2 in Height, NEMA 4X, Wall Mount, Plastic
| Amperage Rating |
: |
12 A |
| Depth |
: |
4.56 in |
| Enclosure Type |
: |
NEMA 4X |
| Height |
: |
7-1/2 in |
| Horsepower |
: |
1/8 to 2 hp |
| Material |
: |
Plastic |
| Mounting Type |
: |
Wall |
| Phase |
: |
1 |
| Type |
: |
Non-Reversing |
| Voltage Rating |
: |
115/230 VAC |
| Width |
: |
5.63 in |
- General purpose for permanent magnet or shunt wound DC motors
- Dual voltage capable on most designs
- Adjustable minimum and maximum speed
- Speed pot included on chassis controls
- Adjustable IR compensation
- Heat sinks required as noted
- PWM controls provide quieter operation, lower motor temperature and greater motor overload capacity
- 90/180 DC volt output
- Open loop flux vector designs
- Easy to Use Keypad and Display
- Optional remote keypad available
- 4 digit LED display
- 8 preset speeds
- Process control, PID modes - direct or reverse acting
- Real time monitoring - 8 register fault history, software version drive network ID, DC bus
-
Specification Sheet
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LEESON_174102_00_Specification_Sheet.pdf