Koyo RC-02 KOYRC02

Drawn Cup Needle Roller Clutches are similar to drawn cup needle roller bearings in design, however, they allow free rotation in only one direction while transmitting torque in the opposite direction. These designs use the same small radial section as drawn cup needle roller bearings and are offered as clutch-only units or as clutch and bearing assemblies.

Koyo Drawn Cup Roller Clutch, Caged Round Bore, Series: RC Inch Series, 1/8 in Bore, 5/16 in OD, 1/4 in Width, CW/CCW Lock Direction, 2.86 in-lb Torque, Steel Bearing, Polymer Cage, 34000 rpm Oil Maximum, -30 to 110 deg C

• For proper application, separate bearings are suggested to carry radial loads and assure concentricity between shaft and housing
• The clutch engages and when housing is rotated relatively to the shaft in the direction of arrow marking as labelled on the cup
• Shaft raceway and housing bore diameters that are necessary for proper mounting and operation are listed on the opposite page
• Compact, lightweight and operate directly on a hardened shaft
• Installation is easily accomplished with a simple press fit
• Best used for light duty torque applications that require a one way clutch
• RC are clutches capable for rotational torque only
• A hardened and machined shaft or an "IR" inner ring is required for optimal performance
• A press fit into the housing is required

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Koyo_AS1024_Catalog.pdf
• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Koyo_AS1024_Catalog.pdf