IPTCI Bearings UCT206-20L3 IPTUCT206-20L3

UCT Series Standard Duty Wide-Slot Take Up ball bearing unit features a cast iron housing and a ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. The Triple-Lip Sealed , deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others.

IPTCI Bearings, UCT206-20L3, Take Up Bearing, Standard Duty, Series: UCT, 1.25 in Bore, 113 mm Length, 28 mm Width, 102 mm Height, 4200 lb Dynamic/2430 lb Static Load, Cast Iron Bearing, 248 deg F

• Wide Inner Ring Bearing
• Set Screw Locking
• Triple Lip Seals (L3)
• Pre-Lubricated with quality NLGI2 Bearing Grease
• Relubricatable through included Grease Zerk