IPTCI Bearings UCPX05-16 IPTUCPX05-16

UCPX Series Medium Duty Pillow Block ball bearing unit features a cast iron housing and a ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening and has a solid base for mounting stability. The double-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. ~~ The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. An anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high-quality multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication.

IPTCI Bearings Pillow Block Ball Bearing Unit, Medium Duty, Series: PX Series, 1 in Bore, 4.69 in Bolt Center-to-Center Length, 1-3/4 in Base to Bore Centerline, 6.26 in Overall Length, 2.01 in Overall Width, 3.35 in Overall Height, 2.01 in Base Width, Set Screw Locking Device, Lip Seal Seal, Non-Expansion (Fixed) Expansion, 4400 lb Dynamic/2540 lb Static Load, 10 to 200 deg F, 5300 rpm Maximum, Cast Iron

• Wide inner ring
• Relubricatable
• Steel flinger
• 0.71 in T base
• 6.26 in L base
• 1.88 in W inside ring

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_03B100A_Catalog.pdf
• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_CLFL20412_Manual.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_UCPX0516_Specification_Sheet.pdf