IPTCI Bearings UCP213-40L3 IPTUCP213-40L3
IPTCI Bearings UCP213-40L3 UCP Standard Duty Pillow Block, 2.5 in Dia Bore, 206.4 mm L Bolt Center-to-Center, 3 in Base to Bore Centerline, 273.1 mm OAL x 152 mm OAH
- Manufacturer: Solve Industrial Motion Group
- Brand Name: IPTCI Bearings
- Part Number: IPTUCP213-40L3
- Alt Part Number: 2101041134
- MPN: UCP213-40L3
- UPC: 080067569744
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
UCP series standard duty pillow block ball bearing unit features a cast iron housing and a ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. The triple-lip-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others.
IPTCI Bearings, UCP213-40L3, Pillow Block, Standard Duty, Series: UCP, 2.5 in Bore, 206.4 mm Bolt Center-to-Center Length, 3 in Base to Bore Centerline, 273.1 mm Overall Length, 68.3 mm Overall Width, 152 mm Overall Height, 68.3 mm Base Width, Set Screw Locking Device, Triple Lip Seal, 12400 lb Dynamic/8760 lb Static Load, 248 deg F, Cast Iron
| Base Width | : | 68.3 mm |
| Base to Bore Centerline | : | 3 in |
| Bolt Center-to-Center Length | : | 206.4 mm |
| Bore Diameter | : | 2-1/2 in |
| Load Capacity | : | 12400 lb Dynamic/8760 lb Static |
| Locking Device | : | Set Screw |
| Material | : | Cast Iron |
| Overall Height | : | 152 mm |
| Overall Length | : | 273.1 mm |
| Overall Width | : | 68.3 mm |
| Seal Type | : | Triple Lip Seal |
| Series | : | UCP |
| Temperature Rating | : | 248 deg F |
| Type | : | Standard Duty |
- Wide Inner Ring Bearing
- Pre-Lubricated with quality NLGI2 Bearing Grease
- Relubricatable through included Grease Zerk
