IPTCI Bearings UCP206-20L3 IPTUCP206-20L3
IPTCI Bearings UCP206-20L3 UCP Standard Duty Pillow Block, 1.25 in Dia Bore, 121 mm L Bolt Center-to-Center, 1.68 in Base to Bore Centerline, 160 mm OAL x 84 mm OAH
- Manufacturer: Solve Industrial Motion Group
- Brand Name: IPTCI Bearings
- Part Number: IPTUCP206-20L3
- Alt Part Number: 2101046389
- MPN: UCP206-20L3
- UPC: 080067574945
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
UCP series standard duty pillow block ball bearing unit features a cast iron housing and a ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. The triple-lip-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others.
IPTCI Bearings, UCP206-20L3, Pillow Block, Standard Duty, Series: UCP, 1.25 in Bore, 121 mm Bolt Center-to-Center Length, 1.68 in Base to Bore Centerline, 160 mm Overall Length, 44 mm Overall Width, 84 mm Overall Height, 44 mm Base Width, Set Screw Locking Device, Triple Lip Seal, 4200 lb Dynamic/2430 lb Static Load, 248 deg F, Cast Iron
| Base Width | : | 44 mm |
| Base to Bore Centerline | : | 1.68 in |
| Bolt Center-to-Center Length | : | 121 mm |
| Bore Diameter | : | 1-1/4 in |
| Load Capacity | : | 4200 lb Dynamic/2430 lb Static |
| Locking Device | : | Set Screw |
| Material | : | Cast Iron |
| Overall Height | : | 84 mm |
| Overall Length | : | 160 mm |
| Overall Width | : | 44 mm |
| Seal Type | : | Triple Lip Seal |
| Series | : | UCP |
| Temperature Rating | : | 248 deg F |
| Type | : | Standard Duty |
- Wide Inner Ring Bearing
- Pre-Lubricated with quality NLGI2 Bearing Grease
- Relubricatable through included Grease Zerk
