IPTCI Bearings UCFL206-20L3 IPTUCFL206-20L3
IPTCI Bearings UCFL206-20L3 UCFL Standard Duty Flange Ball Bearing, 1.25 in Dia Bore, 117 mm L Bolt Center-to-Center, 2-Bolt Flange Mount, 148 mm OAL/Dia
- Manufacturer: Solve Industrial Motion Group
- Brand Name: IPTCI Bearings
- Part Number: IPTUCFL206-20L3
- Alt Part Number: 2101040967
- MPN: UCFL206-20L3
- UPC: 080067569587
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
UCFL Series Standard Duty 2-Bolt Flange ball bearing unit features a cast iron housing and a ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. The Triple-Lip Sealed , deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others.
IPTCI Bearings, UCFL206-20L3, Flange Ball Bearing, Standard Duty, Series: UCFL, 1.25 in Bore, 117 mm Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 148 mm Overall Length/Diameter, 40 mm Overall Depth, 80 mm Overall Height, Set Screw Locking Device, Cast Iron Bearing, NBR Seal, 4200 lb Dynamic/2430 lb Static Load, 248 deg F
| Bearing Material | : | Cast Iron |
| Bolt Center-to-Center Length | : | 117 mm |
| Bore Diameter | : | 1-1/4 in |
| Flange Mounting Type | : | 2-Bolt |
| Load Capacity | : | 4200 lb Dynamic/2430 lb Static |
| Locking Device | : | Set Screw |
| Overall Depth | : | 40 mm |
| Overall Height | : | 80 mm |
| Overall Length/Diameter | : | 148 mm |
| Seal Material | : | NBR |
| Series | : | UCFL |
| Temperature Rating | : | 248 deg F |
| Type | : | Standard Duty |
- Wide Inner Ring Bearing
- Triple Lip Seals (L3)
- Pre-Lubricated with quality NLGI2 Bearing Grease
- Relubricatable through included Grease Zerk
