IPTCI Bearings UCFC 206 30MM IPTUCFC206-30MM
IPTCI Bearings UCFC 206 30MM Standard Duty Flange Block Bearing With Type-B Seal, 30 mm Dia Bore, 3-15/16 in Dia Bolt Circle, 4-Bolt Piloted Flange Mount, 4-15/16 in OAL/Dia
- Manufacturer: Solve Industrial Motion Group
- Brand Name: IPTCI Bearings
- Part Number: IPTUCFC206-30MM
- Alt Part Number: 2101046413
- MPN: UCFC 206 30MM
- UPC: 080067574969
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
UCFC Series Standard Duty 4-Bolt Piloted Flange ball bearing unit features a cast iron housing and a ball bearing insert with flinger seals and set screw lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. The double-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others.
IPTCI Bearings Flange Block Bearing, Standard Duty, Series: UCFC, 30 mm Bore Dia, 3-15/16 in Bolt Circle, 4-Bolt Piloted Flange Mounting, 4-15/16 in Overall Length/Diameter, 4-15/16 in Overall Height, Set Screw Locking Device, 4200 lbf Dynamic Load
| Bolt Circle Diameter | : | 3-15/16 in |
| Bore Diameter | : | 30 mm |
| Flange Mounting Type | : | 4-Bolt Piloted |
| Load Capacity | : | 4200 lbf Dynamic |
| Locking Device | : | Set Screw |
| Overall Height | : | 4-15/16 in |
| Overall Length/Diameter | : | 4-15/16 in |
| Series | : | UCFC |
| Type | : | Standard Duty |
- Wide Inner Ring Bearing
- Dual Seals (B-Type)
- Pre-Lubricated with quality NLGI2 Bearing Grease
- Relubricatable through included Grease Zerk
Catalog
VIDEO LINK
