IPTCI Bearings UC206-20 IPTUC206-20
IPTCI Bearings UC206-20 Silver Normal Duty Ball Bearing Insert, 1-1/4 in Dia Bore, 2.441 in OD, 1-1/2 in W, 4300 lb Dynamic/2500 lb Static Load
- Manufacturer: Solve Industrial Motion Group
- Brand Name: IPTCI Bearings
- Part Number: IPTUC206-20
- Alt Part Number: 2101033228
- MPN: UC206-20
- UPC: 080067562387
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
UC series insert bearings are double-sealed deep-groove ball bearings made of through-hardened chromium steel and are appropriate for applications with moderate radial loads and light thrust or combination loads. They have a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in the outer surface that prevents the bearing from free spinning within the housing and ensures smooth performance. ~~ Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. The bearing locks onto the shaft with two cup point setscrews spaced 120 degrees apart for a three-point contact hold. The area around the set screw is specially annealed to prevent cracking when set screws are tightened. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. ~~ Bearings arrive fully lubricated and ready for use, but can also be re-lubricated as needed. Their design includes a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication while in an appropriate housing. ~~ These Insert bearings are designed for use in pillow block or flange units, made to AFBMA standards, interchangeable, and can be used in housings produced by most manufacturers.
IPTCI Bearings Ball Bearing Insert, Normal Duty, Series: Silver UC 200, 1-1/4 in Bore Dia, 2.441 in Outside Dia, 1-1/2 in Width, 4300 lb Dynamic/2500 lb Static, 100CR6 Steel Bearing, Steel Cage, 5300 rpm Maximum
| Bearing Material | : | 100CR6 Steel |
| Bore Diameter | : | 1-1/4 in |
| Cage Material | : | Steel |
| Load Capacity | : | 4300 lb Dynamic/2500 lb Static |
| Maximum Speed | : | 5300 rpm |
| Outside Diameter | : | 2.441 in |
| Series | : | Silver UC 200 |
| Type | : | Normal Duty |
| Width | : | 1.5 in |
- Set screw locking
- Wide inner ring
- Steel retainer
Catalog
VIDEO LINK
