IPTCI Bearings SUCTFB205-25MM IPTSUCTFB205-25MM

SUCTFB Standard Duty 3-Bolt Flange ball bearing unit features a Thermoplastic housing and a Stainless-Steel ball bearing insert with flinger seals and set screw lock. The housing is made of reinforced PBT that provides low water absorption and excellent dimensional stability provide superior resistance to chemical attack. . The housing has a solid base for mounting stability, and to eliminate crevices that act as entrapment points in wash-down applications. ~~ The double-sealed, deep-groove ball bearing insert is made of 440 grade Stainless and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin on the outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. 300 Series Stainless Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high-quality Food Grade multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Thermoplastic / Stainless Steel Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications that require corrosion resistance due to frequent wash-downs or are operating in a caustic environments such as food processing equipment and machinery, and pharmaceutical producing / processing equipment, among many others.

IPTCI Bearings Ball Bearing Unit, Normal Duty, Series: Silver SUCTFB 200, 25 mm Bore, 41.3 mm/28.6 mm Bolt Center-to-Center Length, 3-Bolt/Solid Base Flange Mounting, 68.5 mm Overall Length/Diameter, 4.08 mm Overall Depth, 120.6 mm Overall Height, Set Screw Locking Device, Silicone Rubber Seal, 11440 N Dynamic/6290 N Static Load, 6250 rpm Maximum, -10 to 210 deg F

• Wide inner ring
• Lip seal
• Stainless steel flinger
• H1 lube
• Interchanges with standard housing dimensions
• Stainless steel sleeves and bushings
• Smooth housing design
• Excellent chemical resistance
• AISI 304 grease fitting
• Reinforced PBT housing

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_SHCST2018_Manual.pdf
• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_SHCTF2018_Catalog.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_SUCTFB2018_Specification_Sheet.pdf
• VIDEO LINK https://www.youtube.com/watch?v=pWhSAr3Ii1A