IPTCI Bearings SB 206 18 G IPTSB206-18G

SB series insert bearings are double-sealed deep-groove ball bearings made of through-hardened chromium steel and are appropriate for applications with moderate radial loads and light thrust or combination loads. The bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. ~~ Steel-reinforced molded rubber lip seals on both sides of the bearing retain the high quality multi-purpose lubricant and prevent contaminants from entering the raceway. The bearing locks onto the shaft with two cup point setscrews spaced 120 degrees apart for a three-point contact hold. The area around the set screw is specially annealed to prevent cracking when set screws are tightened. Set screw locking is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. ~~ Insert bearings arrive fully lubricated and ready for use. SB inserts with the G suffix can also be re- lubricated as needed. ~~ These insert bearings are designed for use in pillow block or flange units, made to AFBMA standards, are interchangeable, and can be used in housings produced by most manufacturers. Ball Bearing mounted units using these inserts are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others.

IPTCI Bearings Bearing Insert, Spherical Relubricatable, Series: SB Series, 1-1/8 in Bore Dia, 2.4409 in Outside Dia, 1.1811 in Width, Setscrew Locking Closure, 4200 lbf Dynamic Load

• Narrow inner race bearing

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_SARFB20412G_Catalog.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/PTI_SB2018G_Specification_Sheet.pdf