IPTCI Bearings NAP 209 28 High Shaft Height Standard Duty Pillow Block, 1-3/4 in Dia Bore, 5-3/4 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-1/2 in OAL x 4-17/64 in OAH
NAP series standard duty Pillow Block ball bearing unit features a cast iron housing and a ball bearing insert with flinger seals and Eccentric Collar lock. The housing is made of cast iron for rigidity and vibration dampening, and has a solid base for mounting stability. The double-sealed, deep-groove ball bearing insert is made of through-hardened chromium steel and is appropriate for applications with moderate radial loads and light thrust or combination loads. It has a wide inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. ~~ The insert bearing has a sphered outer surface that allows it to self-align within the housing & compensate for misalignments. It also has an anti-rotation pin in the outer surface that prevents the bearings from spinning within the housing and ensures smooth performance. Steel-reinforced molded rubber lip seals with flingers on both sides of the bearing retain the high quality multi-purpose lubricant and deflect contaminants away from the seals. ~~ The bearing locks onto the shaft utilizing its included eccentric locking collar. Eccentric Collar locking units are suitable for low to moderate speed applications where the shaft rotates in one direction. The unit is equipped with a grease fitting on the housing’s outer surface for reapplying lubricant, and the insert bearing has a groove and oil hole in the outer ring to efficiently channel grease into the bearing during re-lubrication. ~~ Ball Bearing Pillow Block units are suitable for use in industrial and commercial applications including industrial machinery, conveyors, fans/blowers, agricultural equipment, construction machinery, exercise equipment, and food processing equipment, among many others
IPTCI Bearings Pillow Block, High Shaft Height Standard Duty, Series: NAP, 1-3/4 in Bore Dia, 5-3/4 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-1/2 in Overall Length, 2-1/8 in Overall Width, 4-17/64 in Overall Height, 2-1/8 in Base Width, Eccentric Collar Locking Device, B Seal Seal, Non-Expansion Expansion, 7110 lbf Dynamic Load, Cast Iron
| Base Width | : | 2-1/8 in |
| Base to Bore Centerline | : | 2-1/8 in |
| Bolt Center-to-Center Length | : | 5-3/4 in |
| Bore Diameter | : | 1-3/4 in |
| Expansion Type | : | Non-Expansion |
| Load Capacity | : | 7110 lbf Dynamic |
| Locking Device | : | Eccentric Collar |
| Material | : | Cast Iron |
| Overall Height | : | 4-17/64 in |
| Overall Length | : | 7-1/2 in |
| Overall Width | : | 2-1/8 in |
| Seal Type | : | B Seal |
| Series | : | NAP |
| Type | : | High Shaft Height Standard Duty |