INA NX35-XL INANX35

Needle roller/axial deep groove ball bearings NX have a full complement ball rolling element set and an extremely low radial section height. Due to the compact radial dimensions, bearing arrangements can be achieved with very small shaft center distances, such as those that may be present in multi-spindle drilling machines. A sheet steel end cap secured to the radial bearing component grips the shaft locating washing of the axial bearing and holds the axial bearing component together. As a result, the bearings are self-retaining. The sheet metal caps for bearings NX have lubrication holes for oil lubrication.

INA Needle Roller/Axial Deep Groove Ball Bearing, Single Direction, Series: NX Series, 35 mm Bore, 47 mm OD, 30 mm Width, Open Closure, 41500 N Load, Sheet Steel Cage, 3700 rpm Maximum, -30 to 120 deg C

• The bearings can support high radial loads and moderate axial loads by means of a single bearing position
• Suitable for applications with a very small radial design envelope, where the raceway on the shaft is designed as a rolling bearing raceway
• Permit relatively high speeds, if the rolling element set in the axial bearing component is not full complement but guided by a cage
• High running accuracy
• Permit locating bearing arrangements with only a very small radial design envelope
• Result in axially rigid bearing arrangements
• Easy to mount as they are not self-retaining in many cases
• Permit technically straightforward, economical and cost-effective designs
• For oil lubrication
• Without inner ring
• Without end cap
• X-life design
• 27500 N dynamic/41500 N static radial, 12400 N dynamic/32500 N static axial

• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf