INA NX25-XL INANX25

Needle roller/axial deep groove ball bearings NX have a full complement ball rolling element set and an extremely low radial section height. Due to the compact radial dimensions, bearing arrangements can be achieved with very small shaft center distances, such as those that may be present in multi-spindle drilling machines. A sheet steel end cap secured to the radial bearing component grips the shaft locating washing of the axial bearing and holds the axial bearing component together. As a result, the bearings are self-retaining. The sheet metal caps for bearings NX have lubrication holes for oil lubrication.

INA Needle Roller/Axial Deep Groove Ball Bearing, Single Direction, Series: NX Series, 25 mm Bore, 37 mm OD, 30 mm Width, Open Closure, 22400 N Load, Sheet Steel Cage, 4900 rpm Maximum, -30 to 120 deg C

• Item Features 01=The bearings can support high radial loads and moderate axial loads by means of a single bearing position
• Item Features 02=Suitable for applications with a very small radial design envelope, where the raceway on the shaft is designed as a rolling bearing raceway
• Item Features 03=Permit relatively high speeds, if the rolling element set in the axial bearing component is not full complement but guided by a cage
• Item Features 04=High running accuracy
• Item Features 05=Permit locating bearing arrangements with only a very small radial design envelope
• Item Features 06=Result in axially rigid bearing arrangements
• Item Features 07=Easy to mount as they are not self-retaining in many cases
• Item Features 08=Permit technically straightforward, economical and cost-effective designs
• Item Features 09=For oil lubrication
• Item Features 10=Without inner ring
• Item Features 11=Without end cap
• Item Features 12=X-life design
• Item Features 13=16800 N dynamic/22400 N static radial, 11100 N dynamic/24300 N static axial

• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf