INA K81122-TV/0-8 INAK81122TV

Axial cylindrical roller bearings combine axial cylindrical roller and cage assemblies, housing locating washers and shaft locating washers. The bearings have very low axial section height, high load capacity, high rigidity and can support axial forces in one direction.

INA Axial Cylindrical Roller and Cage Assembly, Single Direction Single Row, Series: K811, 110 mm Bore, 145 mm OD, 11 mm Width, 207000 N Dynamic/700000 N Static Load, Polyamide, 2280 rpm Maximum, -20 to 120 deg C

• Single and double row axial cylindrical roller bearings are particularly suitable where high axial and shock loads occur in one direction but no radial loads are present
• The load carrying capacity of the corresponding axial deep groove ball bearings is no longer adequate
• The axial space available is very small
• The bearing arrangement can be configured, where the axial space is very small, as a direct bearing arrangement
• The bearing parts can or must be mounted separately
• The bearing arrangement is not configured in itself but, for cost reasons, ready-to-fit standard bearings are to be used
• Suitable for combination with axial bearing washer

• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf