INA HK2516-AS1-B INAHK2516-AS1
INA HK2516-AS1-B Drawn Cup Needle Roller Bearing With Open End, 25 mm Dia Bore, 32 mm OD, 1 Row, 16 mm W, 24000 N Load
- Manufacturer: Schaeffler Group
- Brand Name: INA
- Part Number: INAHK2516-AS1
- MPN: HK2516-AS1-B
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
Drawn cup needle roller bearings with open ends are supplied with a needle roller and cage assembly or a full complement needle roller set. Bearings with needle roller and cage assemblies allow higher speeds than the full complement designs.
INA Drawn Cup Needle Roller Bearing, Series: HK Series, 25 mm Bore, 32 mm OD, 1 Rows, 16 mm Width, Open Closure, 24000 N Load, Sheet Steel Cage, 10200 rpm Maximum, -30 to 140 deg C
| Bore Diameter | : | 25 mm |
| Cage Material | : | Sheet Steel |
| Closure Type | : | Open |
| Load Capacity | : | 24000 N |
| Maximum Speed | : | 10200 rpm |
| Number of Rows | : | 1 |
| Outside Diameter | : | 32 mm |
| Series | : | HK Series |
| Temperature Rating | : | -30 to 140 deg C |
| Width | : | 16 mm |
- The bearings are particularly suitable for applications with a very small radial section height on account of their very low cross-sectional height
- Used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
- Can support high radial loads
- Require a considerably smaller radial design envelope than machined needle roller bearings
- Usually run directly on the shaft
- Permit relatively high speeds
- Easy to mount
- Require no additional means of axial retention
- Can be readily used to close off the shaft ends of bearing positions
- Result in particularly compact, cost-effective and economical bearing arrangements
- AS1 with lubrication hole from HK0609
- 15600 N dynamic/24000 N static
Warranty Information