Contact 812-425-1336

IDC Select® IDC UCPX06-20 IDCUCPX06-20
  1. pin-int

IDC Select® IDC UCPX06-20 IDCUCPX06-20

IDC Select® IDC UCPX06-20 UCPX Medium Duty Solid Base Pillow Block, 1-1/4 in Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-57/64 in OAL

  • Manufacturer: IDC Select
  • Brand Name: IDC Select®
  • Part Number: IDCUCPX06-20
  • MPN: IDC UCPX06-20
  • UPC: 887412075013
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at EVANSVILLE, IN
  • loading Check Availability at All Branches

IDC Select® line of mounted bearings combines quality, innovation and affordability to give you the advantage you need. Whether your bearing needs are light, standard or medium duty, IDC Select® offers a wide variety of choices for your specific requirements. IDC Select® mounted units feature a cast iron housing with a solid base, a wide inner ring bearing, dual heavy duty contact seals and steel plate slingers on both sides for dust exclusion. They also have full self-alignment, a grease fitting for adding lubricant and setscrew units which have two setscrews 120 deg apart in the inner ring. Eccentric locking collar units provide locking for one-directional applications. Triple lip seals are available on request.

IDC Select® Pillow Block, Medium Duty Solid Base, Series: UCPX, 1-1/4 in Bore, 5 in Bolt Center-to-Center Length, 1-7/8 in Base to Bore Centerline, 6-57/64 in Overall Length, 2-1/4 in Base Width, Set Screw Locking Device, Dual Contact Seal, 5777.59 lb Load, -40 to 250 deg F, Cast Iron

Base Width      :      2-1/4 in
Base to Bore Centerline      :      1-7/8 in
Bolt Center-to-Center Length      :      5 in
Bore Diameter      :      1-1/4 in
Load Capacity      :      5777.59 lb
Locking Device      :      Set Screw
Material      :      Cast Iron
Overall Length      :      6-57/64 in
Seal Type      :      Dual Contact
Series      :      UCPX
Temperature Rating      :      -40 to 250 deg F
Type      :      Medium Duty Solid Base
  • Dual heavy duty slinger type contact seals
  • Wide heat treated inner ring bearing for durability
  • Steel plate slingers on both sides for dust exclusion
  • Cup point setscrews 120 deg apart lock unit securely to shaft
  • Fully self-aligning
  • Grease fitting for adding lubricant
  • Anti-rotation pin
  • 1-piece solid base cast iron housing
  • 5777.59 lb dynamic/3439.58 lb static load capacity
  • pdfTechnical Bulletin https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDC_SELECT_IDC_HCF201_8_Technical_Bulletin.pdf