IDC Select® IDC GEZ 108ES IDCGEZ108ES

Spherical plain bearings are manufactured in a wide variety of materials to offer bearing solutions in almost any operating environment. IDC Select® bearings offer a line of spherical bearings in inch and metric. They utilize inner and outer rings with spherical sliding surfaces and can accommodate heavy radial loads and bidirectional axial loads at the same time. The variety of designs offer misalignment, angular contact, an extended inner ring, case carburized and enhanced lubrication groove spherical bearing designs. These products are used in pivoting, high load bearing applications where angular misalignment is required. Most typically, spherical plain bearings are employed in hydraulic cylinder rod ends, vehicle steering linkage suspensions, heavy equipment articulated joints and other severe duty uses.

IDC Select® Spherical Plain Bearing, Series: GEZ, 1-1/2 in Bore Dia, 2-7/16 in Outside Dia, 1.312 in W, Open Closure, 375 kN, Steel Bearing

• For heavy radial and bidirectional axial (thrust) loads at the same time
• Sliding surface steel on steel MoS2 treated
• Single fracture design
• Relubricatable through annular grooves and oil holes in inner and outer rings
• 125 kN dynamic/375 kN static load capacity

• Technical Bulletin https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDC_SELECT_IDC_CB2107_Technical_Bulletin.pdf