Gates® Power Transmission 6/3VX850 GAT6/3VX850

When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.

Gates® Power Transmission Super HC® Molded Notch PowerBand® V-Belt, Heavy Duty Molded Notch, Series: 9388, 3VX Section, 3/8 in Top Width, 85 in Outside Length, 21/64 in Thickness, 6 Ribs, 3.82 in Diameter Minimum Pulley, -60 to 250 deg F, EPDM, Flex-Bonded Polyester Reinforced

• Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
• Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
• The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
• Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Gates_92406179_Catalog.pdf
• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Gates_92406179_Manual.pdf