Formsprag Clutch® ASNU30 FORASNU30
Formsprag Clutch® ASNU30 Ramp and Roller Clutch With Keyway, 30 mm Dia Bore, 72 mm OD, 188 ft-lb Torque, 1400 rpm Inner/2200 rpm Outer Race Max
- Manufacturer: Regal Rexnord
- Brand Name: Formsprag Clutch®
- Part Number: FORASNU30
- Alt Part Number: 30148838
- MPN: ASNU30
- UPC: 786582286260
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
Model ASNU is a ramp and roller type clutch, non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing are required. Nominal outer diameter is the same as a series 63 ball bearing.
Formsprag Clutch® Ramp and Roller Clutch, Series: ASNU, 30 mm Bore, 72 mm OD, 27 mm Overall Length, 188 ft-lb Torque, 1400 rpm Inner/2200 rpm Outer Race Maximum, Vertical (Zero-U) Mounting
| Bore Diameter | : | 30 mm |
| Maximum Speed | : | 1400 rpm Inner/2200 rpm Outer Race |
| Mounting Type | : | Vertical (Zero-U) |
| Outside Diameter | : | 72 mm |
| Overall Length | : | 27 mm |
| Series | : | ASNU |
| Torque Rating | : | 188 ft-lb |
- The outer race has positive n6 tolerance, to give a press fit in a H7 housing, additional side notches in the outer race provide positive torque transmission
- If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough not to expand after assembly
- This design can accept an axial misalignment of inner and outer race of +/- S/2
- These clutches are oil dipped at the factory but must be filled to the proper level before operation
- This clutch is designed for oil lubrication
- External bearing support required
- Formsprag Clutch® recommends the use of our HPI series for indexing rates in excess of 150 strokes per minute or indexing angles in excess of 90 deg
Instruction/Installation Manual