Formsprag Clutch® AS10 FORAS10
Formsprag Clutch® AS10 AS Series Ramp and Roller Clutch With Keyway, 10 mm Dia Bore, 30 mm OD, 5 ft-lb Torque, 3500 rpm Inner/5200 rpm Outer Race Max
- Manufacturer: Regal Rexnord
- Brand Name: Formsprag Clutch®
- Part Number: FORAS10
- Alt Part Number: 30148807
- MPN: AS10
- UPC: 786582285959
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
Model AS is a ramp and roller type clutch, non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing are required. Nominal outside dimensions are the same as a series 62 ball bearing.
Formsprag Clutch® Ramp and Roller Clutch, Series: AS Series, 10 mm Bore, 30 mm OD, 9 mm Overall Length, 5 ft-lb Torque, 3500 rpm Inner/5200 rpm Outer Race Maximum, Vertical (Zero-U) Mounting
| Bore Diameter | : | 10 mm |
| Maximum Speed | : | 3500 rpm Inner/5200 rpm Outer Race |
| Mounting Type | : | Vertical (Zero-U) |
| Outside Diameter | : | 30 mm |
| Overall Length | : | 9 mm |
| Series | : | AS Series |
| Torque Rating | : | 5 ft-lb |
- The outer race has positive n6 tolerance, to give a press fit in a H7 housing, additional side notches in the outer race provide positive torque transmission
- Can accept an axial misalignment of inner and outer race of +/- S/2
- These clutches are oil dipped at the factory but must be filled to the proper level before operation
- This clutch is designed for oil lubrication
- External bearing required design
- Formsprag Clutch® recommends the use of our HPI series for indexing rates in excess of 150 strokes per minute or indexing angles in excess of 90 deg
- The inner race is keyed to the shaft
Instruction/Installation Manual