FAG QJ338-N2-MPA-C3 FAGQJ338N2MPAC3
FAG QJ338-N2-MPA-C3 4-Point Angular Contact Ball Bearing With (2) Retaining Slots, 190 mm Dia Bore, 400 mm OD, 1 Row, 78 mm W, 35 deg, 1250000 N Load
- Manufacturer: Schaeffler Group
- Brand Name: FAG
- Part Number: FAGQJ338N2MPAC3
- MPN: QJ338-N2-MPA-C3
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
Single-row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other along the bearing axis. The bearings are available in open and sealed designs. Their angular adjustment facility is very limited.
FAG Angular Contact Ball Bearing, 4-Point, Series: QJ3-N2, 190 mm Bore, 400 mm OD, 1 Rows, 78 mm Width, 35 deg Contact Angle, Open Closure, 1250000 N Load, Brass Cage, 2850 rpm Maximum, 200 deg C
| Bore Diameter | : | 190 mm |
| Cage Material | : | Brass |
| Closure Type | : | Open |
| Contact Angle | : | 35 deg |
| Load Capacity | : | 1250000 N |
| Maximum Speed | : | 2850 rpm |
| Number of Rows | : | 1 |
| Outside Diameter | : | 400 mm |
| Series | : | QJ3-N2 |
| Temperature Rating | : | 200 deg C |
| Type | : | 4-Point |
| Width | : | 78 mm |
- Four point contact bearings are particularly suitable where predominantly axial loads must be supported
- The axial design envelope is not sufficient for double row radial angular contact ball bearings
- Radial forces must be supported by a separate radial bearing
- Axial forces occur in both directions and a close axial guidance is required in conjunction with a small bearing width
- Standard solid brass cage
- 740000 N dynamic/1250000 N static
- Special design axial internal clearance larger than normal
- (2) retaining slots in outer ring