FAG QJ218-XL-N2-MPA FAGQJ218N2MPA
FAG QJ218-XL-N2-MPA 4-Point Angular Contact Ball Bearing With (2) Retaining Slots, 90 mm Dia Bore, 160 mm OD, 1 Row, 30 mm W, 35 deg, 185000 N Load
- Manufacturer: Schaeffler Group
- Brand Name: FAG
- Part Number: FAGQJ218N2MPA
- MPN: QJ218-XL-N2-MPA
- Min. Order Qty: 1
- Qty. Interval: 1
- Sign In for Pricing and Availability
- Sold As: 1/EA
-
Price:
Single-row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other along the bearing axis. The bearings are available in open and sealed designs. Their angular adjustment facility is very limited.
FAG Angular Contact Ball Bearing, 4-Point, Series: QJ2-N2, 90 mm Bore, 160 mm OD, 1 Rows, 30 mm Width, 35 deg Contact Angle, Open Closure, 185000 N Load, Brass Cage, 7400 rpm Maximum, -30 to 150 deg C
| Bore Diameter | : | 90 mm |
| Cage Material | : | Brass |
| Closure Type | : | Open |
| Contact Angle | : | 35 deg |
| Load Capacity | : | 185000 N |
| Maximum Speed | : | 7400 rpm |
| Number of Rows | : | 1 |
| Outside Diameter | : | 160 mm |
| Series | : | QJ2-N2 |
| Temperature Rating | : | -30 to 150 deg C |
| Type | : | 4-Point |
| Width | : | 30 mm |
- Four point contact bearings are particularly suitable where predominantly axial loads must be supported
- The axial design envelope is not sufficient for double row radial angular contact ball bearings
- Radial forces must be supported by a separate radial bearing
- Axial forces occur in both directions and a close axial guidance is required in conjunction with a small bearing width
- X-life design
- Standard solid brass cage
- 181000 N dynamic/185000 N static
- (2) retaining slots in outer ring