Contact 812-425-1336

FAG QJ208-XL-TVP FAGQJ208TVP
  1. pin-int

FAG QJ208-XL-TVP FAGQJ208TVP

FAG QJ208-XL-TVP 4-Point Angular Contact Ball Bearing, 40 mm Dia Bore, 80 mm OD, 1 Row, 18 mm W, 35 deg, 58000 N Load

  • Manufacturer: Schaeffler Group
  • Brand Name: FAG
  • Part Number: FAGQJ208TVP
  • MPN: QJ208-XL-TVP
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading
  • Sign In for Pricing and Availability

Single-row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other along the bearing axis. The bearings are available in open and sealed designs. Their angular adjustment facility is very limited.

FAG Angular Contact Ball Bearing, 4-Point, Series: QJ2, 40 mm Bore, 80 mm OD, 1 Rows, 18 mm Width, 35 deg Contact Angle, Open Closure, 58000 N Load, Polyamide Cage, 10600 rpm Maximum, -30 to 120 deg C

Bore Diameter      :      40 mm
Cage Material      :      Polyamide
Closure Type      :      Open
Contact Angle      :      35 deg
Load Capacity      :      58000 N
Maximum Speed      :      10600 rpm
Number of Rows      :      1
Outside Diameter      :      80 mm
Series      :      QJ2
Temperature Rating      :      -30 to 120 deg C
Type      :      4-Point
Width      :      18 mm
  • Four point contact bearings are particularly suitable where predominantly axial loads must be supported
  • The axial design envelope is not sufficient for double row radial angular contact ball bearings
  • Radial forces must be supported by a separate radial bearing
  • Axial forces occur in both directions and a close axial guidance is required in conjunction with a small bearing width
  • X-life design
  • Standard window cage made from glass fiber reinforced polyamide PA66
  • 58000 N dynamic/46500 N static