Contact 812-425-1336

FAG NU230-E-XL-M1-C3 FAGNU230EXLM1C3
  1. pin-int

FAG NU230-E-XL-M1-C3 FAGNU230EXLM1C3

FAG NU230-E-XL-M1-C3 Separable Cylindrical Roller Bearing With Cage, 150 mm Dia Bore, 270 mm OD, 1 Row, 45 mm W, 590000 N Load

  • Manufacturer: Schaeffler Group
  • Brand Name: FAG
  • Part Number: FAGNU230EXLM1C3
  • MPN: NU230-E-XL-M1-C3
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at EVANSVILLE, IN
  • loading Check Availability at All Branches

In bearings of type NU, the outer ring has two rigid ribs, while the inner ring has no ribs. As a result, axial displacements of the shaft relative to the housing are possible in both directions and within certain limits. During rotational motion, length compensation occurs without constraint in the bearing between the rollers and the raceway without ribs and is therefore practically free from friction. The maximum axial displacement s is given in the product tables. The bearings are used as non-locating bearings, i.e. they cannot guide the shaft axially in either direction. For use as semi-locating bearings, they can be combined with the L-section ring HJ.

FAG Cylindrical Roller Bearing, Separable, Series: NU2-E, 150 mm Bore, 270 mm OD, 1 Rows, 45 mm Width, 590000 N Load, Solid Brass Cage, 3950 rpm Maximum, -30 to 150 deg C

Bore Diameter      :      150 mm
Cage Material      :      Solid Brass
Load Capacity      :      590000 N
Maximum Speed      :      3950 rpm
Number of Rows      :      1
Outside Diameter      :      270 mm
Series      :      NU2-E
Temperature Rating      :      -30 to 150 deg C
Type      :      Separable
Width      :      45 mm
  • Bearing arrangements are subjected to very high radial loads
  • Bearing arrangements must have very high rigidity
  • Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
  • High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
  • Non-locating bearing function
  • Increased capacity design
  • X-life design
  • Solid brass cage, two-piece, roller-guided
  • C3 radial internal clearance
  • 520000 N dynamic/590000 N static