Contact 812-425-1336

FAG 24036-BE-XL-K30-C3 FAG24036BEXLK30C3
  1. pin-int

FAG 24036-BE-XL-K30-C3 FAG24036BEXLK30C3

FAG 24036-BE-XL-K30-C3 Tapered Bore Spherical Roller Bearing, 180 mm Dia Bore, 280 mm OD, 2 Rows, 100 mm W, 1770 kN Load

  • Manufacturer: Schaeffler Group
  • Brand Name: FAG
  • Part Number: FAG24036BEXLK30C3
  • MPN: 24036-BE-XL-K30-C3
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at EVANSVILLE, IN
  • loading Check Availability at All Branches

Spherical roller bearings are a special rolling bearing design whose inner ring runs inside the outer ring on two rows of rollers. The bearings have an angular adjustment of up to 2 deg and are not only designed for high load carrying capacity but can also compensate misalignments.

FAG Spherical Roller Bearing, Tapered Bore, Series: 240-BE, 180 mm Bore, 280 mm OD, 2 Rows, 100 mm Width, Open Closure, 1770 kN Load, Sheet Steel Cage, 2200 rpm Maximum, -30 to 200 deg C

Bore Diameter      :      180 mm
Cage Material      :      Sheet Steel
Closure Type      :      Open
Load Capacity      :      1770 kN
Maximum Speed      :      2200 rpm
Number of Rows      :      2
Outside Diameter      :      280 mm
Series      :      240-BE
Temperature Rating      :      -30 to 200 deg C
Type      :      Tapered Bore
Width      :      100 mm
  • Spherical roller bearings are suitable where rearing arrangements are subjected to high and very high radial loads
  • Relatively high axial loads occur on one or both sides, in addition to high radial forces
  • Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
  • High shock type loads must be supported dynamically
  • Locating bearings with a very high load carrying capacity are required
  • Two sheet steel cages, surface hardened, guidance on inner ring
  • X-life design
  • 1:30 tapered bore
  • C3 radial internal clearance
  • Loose central rib
  • 1130 kN dynamic/1770 kN static