Contact 812-425-1336

FAG 23940-S-K-MB FAG23940SKMB
  1. pin-int

FAG 23940-S-K-MB FAG23940SKMB

FAG 23940-S-K-MB Tapered Bore Spherical Roller Bearing, 200 mm Dia Bore, 280 mm OD, 2 Rows, 60 mm W, 1070 kN Load

  • Manufacturer: Schaeffler Group
  • Brand Name: FAG
  • Part Number: FAG23940SKMB
  • MPN: 23940-S-K-MB
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Pricing and Availability

Spherical roller bearings are a special rolling bearing design whose inner ring runs inside the outer ring on two rows of rollers. The bearings have an angular adjustment of up to 2 deg and are not only designed for high load carrying capacity but can also compensate misalignments.

FAG Spherical Roller Bearing, Tapered Bore, Series: 239, 200 mm Bore, 280 mm OD, 2 Rows, 60 mm Width, Open Closure, 1070 kN Load, Solid Brass Cage, 2800 rpm Maximum, -30 to 200 deg C

Bore Diameter      :      200 mm
Cage Material      :      Solid Brass
Closure Type      :      Open
Load Capacity      :      1070 kN
Maximum Speed      :      2800 rpm
Number of Rows      :      2
Outside Diameter      :      280 mm
Series      :      239
Temperature Rating      :      -30 to 200 deg C
Type      :      Tapered Bore
Width      :      60 mm
  • Spherical roller bearings are suitable where rearing arrangements are subjected to high and very high radial loads
  • Relatively high axial loads occur on one or both sides, in addition to high radial forces
  • Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
  • High shock type loads must be supported dynamically
  • Locating bearings with a very high load carrying capacity are required
  • Two brass cages, guidance on inner ring, inner ring with two lateral retaining ribs and one central rib
  • 1:12 tapered bore
  • S lubrication groove and lubrication holes in outer ring
  • Rigid central rib on inner ring
  • 550 kN dynamic/1070 kN static