FAG 22310-E1-XL-T41A FAG22310E1XLT41A

Spherical roller bearings are a special rolling bearing design whose inner ring runs inside the outer ring on two rows of rollers. The bearings have an angular adjustment of up to 2 deg and are not only designed for high load carrying capacity but can also compensate misalignments.

FAG Spherical Roller Bearing, Cylindrical Bore, Series: 223-E1, 50 mm Bore, 110 mm OD, 2 Rows, 40 mm Width, Open Closure, 229 kN Load, Sheet Steel Cage, 6300 rpm Maximum, -30 to 200 deg C

• Item Features 01=Spherical roller bearings are suitable where rearing arrangements are subjected to high and very high radial loads
• Item Features 02=Relatively high axial loads occur on one or both sides, in addition to high radial forces
• Item Features 03=Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
• Item Features 04=High shock type loads must be supported dynamically
• Item Features 05=Locating bearings with a very high load carrying capacity are required
• Item Features 06=Two sheet steel cages, surface hardened or coated, guidance on outer ring
• Item Features 07=X-life design
• Item Features 08=For vibratory machinery
• Item Features 09=T41A for oscillating load with restricted diameter tolerances, C4 radial internal clearance
• Item Features 10=Without central rib on inner ring
• Item Features 11=229 kN dynamic/223 kN static

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FAG_22317E1XL_Catalog.pdf