FAG 22230-E1A-XL-K-M FAG22230E1AXLKM

Spherical roller bearings are a special rolling bearing design whose inner ring runs inside the outer ring on two rows of rollers. The bearings have an angular adjustment of up to 2 deg and are not only designed for high load carrying capacity but can also compensate misalignments.

FAG Spherical Roller Bearing, Tapered Bore, Series: 222-E1A, 150 mm Bore, 270 mm OD, 2 Rows, 73 mm Width, Open Closure, 1210000 N Load, Solid Brass Cage, 2600 rpm Maximum, -30 to 200 deg C

• Spherical roller bearings are suitable where rearing arrangements are subjected to high and very high radial loads
• Relatively high axial loads occur on one or both sides, in addition to high radial forces
• Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
• High shock type loads must be supported dynamically
• Locating bearings with a very high load carrying capacity are required
• One brass double comb cage, guided by rollers, inner ring with two lateral retaining ribs
• X-life design
• 1:12 tapered bore
• Without central rib on inner ring
• 1010000 N dynamic/1210000 N static

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FAG_22317E1XL_Catalog.pdf