Fafnir® YCJT1 SGT TIMYCJT1SGT

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken® Fafnir®, YCJT1 SGT, Flange Mount Ball Bearing Unit, Industrial Normal Duty, Series: YCJT, 1 in Bore, 3-29/32 in Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 4-7/8 in Overall Length/Diameter, 1.575 in Overall Depth, 1.546 in Overall Height, Set Screw Locking Device, Steel Bearing, 3490 lb Dynamic/1760 lb Static Load, 5440 rpm Maximum, -30 to 275 deg F, Uncoated

• Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft
• This series has the same design as the YCJ series, but is mounted with two-bolts instead of four
• All units are equipped with GY-KRRB wide-inner-ring set screw bearings
• Spherical outside diameter of the bearings mounted in the corresponding machined housing seats provides the initial self-alignment
• The units are factory pre-lubricated
• A grease fitting is provided for relubrication

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_GVFD1_1_2_Catalog.pdf