Contact 812-425-1336

Fafnir® PB1 1/4S TIMPB1 1/4S
  1. pin-int

Fafnir® PB1 1/4S TIMPB1 1/4S

Timken® Fafnir® PB1 1/4S PB Series Light Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 3 to 4-1/8 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-5/8 in OAH

  • Manufacturer: Timken
  • Brand Name: Fafnir®
  • Part Number: TIMPB1 1/4S
  • MPN: PB1 1/4S
  • UPC: 087796058439
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading
  • Sign In for Pricing and Availability

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken® Fafnir®, PB1 1/4S, Pillow Block Ball Bearing Unit, Light Duty, Series: PB Series, 1-1/4 in Bore, 3 to 4-1/8 in Bolt Center-to-Center Length, 1-5/16 in Base to Bore Centerline, 4-7/8 in Overall Length, 0.93 in Overall Width, 2-5/8 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-1/4 in Base Width, Eccentric Locking Device, Contact Seal, Non-Expansion (Fixed), 4370 lb Dynamic/2530 lb Static Load, 250 deg F, 4570 rpm Maximum, Cast Iron, Uncoated

Base Width      :      1-1/4 in
Base to Bore Centerline      :      1-5/16 in
Bolt Center-to-Center Length      :      3 to 4-1/8 in
Bore Diameter      :      1-1/4 in
Bore Type      :      Round
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Uncoated
Load Capacity      :      4370 lb Dynamic/2530 lb Static
Locking Device      :      Eccentric
Material      :      Cast Iron
Maximum Speed      :      4570 rpm
Mounting Type      :      Two-Bolt Base
Overall Height      :      2-5/8 in
Overall Length      :      4-7/8 in
Overall Width      :      0.93 in
Seal Type      :      Contact
Series      :      PB Series
Temperature Rating      :      250 deg F
Type      :      Light Duty
  • The PB series provides the advantages of ball bearings at an economical price
  • The PB series consists of a two-piece separable zinc-plated steel housing with a spherical bearing seat
  • This allows the spherically ground bearing-to have initial self-alignment in all directions
  • The ball bearing is an RA-RRB extended inner-ring-type with positive-contact, land-riding seals and a self-locking collar
  • The series incorporates an improved shroud-cap design and comes permanently pre-lubricated
  • Smaller housing
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_010_6015S_Catalog.pdf