Fafnir® 7318WN TIM7318WN

Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row conrad bearings can accommodate thrust in both directions.

Timken® Fafnir®, 7318WN, Angular Contact Ball Bearing, Medium Duty, Series: 7300, 90 mm Bore, 190 mm OD, 1 Rows, 43 mm Width, 40 deg Contact Angle, Open Closure, 35100 lb Dynamic/30500 lb Static Load, Steel Bearing, Pressed Brass Cage, 2500 rpm Grease/2860 rpm Oil Maximum, -50 to 120 deg C, Uncoated

• Specific geometry of angular contact bearing raceways and shoulders creates ball contact angles that support higher axial loads
• Dimensionally interchangeable with the radial 300 series
• 7000WN product family includes a refined bore diameter
• The 7300WN series can sustain heavier thrust and combined loads than the 7200WN series
• A single bearing is suggested for applications in which the thrust load is in one direction or in the case of combined loads, the thrust load is high in relation to the radial load
• A duplex pair is suggested for applications where thrust is present in both directions or where axial displacement of the shaft must be restricted
• For exceptionally high thrust loads in one direction, a tandem pair can be used, opposed by a third bearing
• Size 7303W has a 20 deg contact angle and a steel cage
• Sizes 7304WN through 7318WN have a 40 deg contact angle and a one-piece, ball-piloted, pressed-brass cage
• Larger sizes 7319WN through 7330WN have a 40 deg contact angle and a one-piece, outer-ring piloted high-strength machined bronze cage
• Sizes 7306WN to 7318WN also available with a one-piece, high-strength, machined bronze retainer

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_5210W_C1_Catalog.pdf