Dodge® 078955 DOD078955

Dodge® TB-SC-35M-NL (078955) is a Series 207 normal duty pillow block ball bearing unit with a 35 mm round bore. It uses tapped base mounting, 65 deg set screw locking, a single lip seal, and a non-expansion (fixed) design. Load capacity is 25628 N Dynamic/15395 N Static. A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.

Dodge® TB-SC-35M-NL (078955) Pillow Block Ball Bearing Unit, Normal Duty, Series: 207, 35 mm Bore, 82.6 mm Bolt Center-to-Center Length, 47.6 mm Base to Bore Centerline, 108 mm Overall Length, 43.4 mm Overall Width, 95.3 mm Overall Height, Tapped Base Mounting, Round Bore, 47.8 mm Base Width, 65 deg Set Screw Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 25628 N Dynamic/15395 N Static Load, 5500 rpm Maximum, Cast Iron, Powder Coated

• 65 deg setscrew locking system
• Precision hardened and honed inner and outer rings
• Grade 10 balls
• Wide inner ring design
• No lube or sealed for life

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dodge_049380_Catalog.pdf
• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dodge_049380_Instruction_Sheet.pdf
• Owners/User Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dodge_049426_Manual.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_235cb7a7b46d0a573252445d2e7a1ca5ff349d2d3dda1616e9098e37adf795b6.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_f72c3f2fd40e44bf27049362066fbbce79f483ddafb5d33790909f1947046c15.pdf