Dodge® 078278 DOD078278

The Dodge® Grip-Tight® mounted ball bearing is the maintenance-friendly solution for all of your ball bearing application needs, capable of performing critical functions in many operations. Grip-Tight® mounted ball bearings offer a unique method of shaft attachment via a thin wall tapered adapter sleeve and locknut design. Because of this system, bearing assemblies may be installed and removed from a shaft easily. 360 deg of concentric grip on the shaft for the entire length-through-bore of the bearing means Grip-Tight® provides a tight press fit with no shaft damage, even on commercial grade shafting.

Dodge® Pillow Block Ball Bearing Unit, Normal Duty, Series: 207, 1-3/8 in Bore, 3-1/4 in Bolt Center-to-Center Length, 1.88 in Base to Bore Centerline, 4-1/4 in Overall Length, 1.62 in Overall Width, 3-3/4 in Overall Height, Tapped Base Mounting, Round Bore, 1.88 in Base Width, Grip-Tight® Adapter Mounted Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 5759 lb Dynamic/3461 lb Static Load, 9500 rpm Maximum, Cast Iron

• Wide inner ring
• Patented pull/push thin wall adapter system
• Ideal for high-speed applications in which concentricity is important
• Little or no bearing vibration at high speeds
• More efficient fan balancing
• Decreased labor during removal with no shaft reconditioning
• Alleviates setscrew issues due to vibration
• Patented DualGuard™ seal, featuring the rubberized flinger is standard

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dodge_075016_Manual.pdf